비드시스템

페이지 정보

profile_image
작성자초코쿠키 조회 33회 작성일 2021-05-04 07:43:14 댓글 0

본문

Bead Roller Drive System - Attach a Motor to Your Hand Crank Bead Roller - Eastwood

In this video Randy goes over the Bead Roller System, which is a must have if you have a hand crank bead roller and want to start working by yourself! Attach this bead roller to most hand crank bead roller with 25 mm shafts at the crank handle.

Buy one HERE: https://www.eastwood.com/eastwood-bead-roller-drive-system.html?utm_source=youtube\u0026utm_medium=annotation\u0026utm_campaign=2018-08-27\u0026utm_content=Bead%20Roller%20Motor

A must-have setup to enable your bead roller to become an easy one-man operation without hand cranking. Perfect for custom sheet metal work, with electric power and foot pedal control.

EASTWOOD BEAD ROLLER DRIVE SYSTEM FEATURES:
Powerful 1/6hp 120v reversible electric motor makes solo work easy
Foot Pedal and speed controller make it easy to keep a consistent speed while forming in a straight line or around bends
Infinitely variable speed control
Mates up to All Three Eastwood manual bead rollers and numerous other brands
ONE MAN OPERATION
With the Eastwood Bead Roller Power Drive System, it no longer takes two people to fabricate a metal panel. The Drive System features a 3 Position Toggle Switch with an infinitely variable Speed Controller and Foot Switch. These features provide convenient one-person operate.

POWERFUL DRIVE SYSTEM
The Eastwood Bead Roller Drive System features a powerful 1.65-amp motor with an integral 75:1 gear reduction that enables you to easily forms ½” beads in 18-gauge steel. Unlike other motors on the market, the Eastwood Drive System has a durable industrial style motor, which gives you more power then you need.

FITS ALL EASTWOOD BEAD ROLLERS
Eastwood designed this power drive system to fit all Eastwood Bead Rollers and others with a plate steel frame and 50mm bearing block bolt pattern. Installation takes less than 30 minutes.

UNIVERSAL DESIGN TO FIT OTHER BEAD ROLLERS
The drive motor fits any hand crank bead roller with a standard shaft size, which is 25mm at the crank handle. The shaft is usually smaller where the dies attach (often 22mm).

Motor: 1/6 HP 1.65 Amp
Gear Reduction: 75:1
Toggle Switch: 3 Position
Infinite Speed Adjustment: 0 – 20 RPM (11.8FPM)
Speed Control Knob: Infinitely Variable
Foot Switch: On/Off
Length: 20.5"
Width: 8.08"
Height: 9.06"
Weight: 18.5 lbs.

For more information on Eastwood products visit www.eastwood.com or stay connected with the team via:
Facebook - https://www.facebook.com/eastwoodcompany
Instagram - http://instagram.com/eastwoodco
Blog - http://www.eastwood.com/blog

Eastwood has everything you need to do the job right when you're restoring a car, truck or motorcycle - from welders to paint and everything in between.

TCX53 Performance Tire Changer with Bead Press System by Hunter Engineering

Hunter's new TCX53 Performance Tire Changer with bread press system! The TCX53 tire changer machine is the heaviest tire changer in its class and offers a long service life.

For more information on the TCX53 tire changer, please visit: http://www.hunter.com/tire-changers/tcx53

For a complimentary on-site demonstration, please visit: http://www.hunter.com/

For more information on Hunter's full line of tire changers, please visit: http://www.hunter.com/tire-changers

독일 VITRONIC 사의 3D비전검사 시스템 VIROwsi소개 동영상, 모니텍, MONITECH

세계 최고의 3D용접비드 검사장치인 독일의 VITRONIC사의 VIROwsi 시스템 소개 동영상입니다.
한국은 모니텍(주)에서 총판을 맡아 판매, 설치, 시운전, 교육, AS등의 제반 활동을 하고 있습니다. 051 311 8691

... 

#비드시스템

댓글목록

등록된 댓글이 없습니다.

전체 4,000건 1 페이지
게시물 검색
Copyright © www.grp.or.kr. All rights reserved.  Contact : help@oxmail.xyz